Pool Articles

Cloudy Pool Advice #141

safencleanpools.com, pool clarifier, pool troubleshooting, problem solved

Cloudy pool water can be a frustrating problem for pool owners. Not only does it make the pool less visually appealing, but it can also be a sign of underlying issues that need to be addressed. In this blog, we’ll discuss some common causes of cloudy pool water and provide some tips for troubleshooting and fixing the issue.

  1. Improper pH and chlorine levels: One of the most common causes of cloudy pool water is imbalanced pH and chlorine levels. The pH level should be between 7.2 and 7.8, and the chlorine level should be between 1 and 3 ppm (parts per million). If either of these levels is too high or too low, it can cause the water to become cloudy. To fix this issue, you’ll need to test the water using a pool test kit and adjust the pH and chlorine levels as needed.
  2. Algae growth: Algae can also cause cloudy pool water. If you notice a green or yellow tint to the water, it’s likely that algae is the culprit. To get rid of algae, you’ll need to shock the pool and use an algaecide. Be sure to follow the instructions on the algaecide carefully, as overuse can lead to further problems.
  3. Debris in the water: Debris such as leaves, dirt, and other contaminants can also cause cloudy pool water. To fix this issue, you’ll need to skim the surface of the water regularly to remove any visible debris. You should also use a pool filter and a pool clarifier to remove smaller particles from the water.
  4. Poor circulation: If the water in your pool isn’t circulating properly, it can become cloudy. This can be caused by a malfunctioning pump or filter, or by a clogged skimmer basket. To fix this issue, you’ll need to check and clean these components to ensure that the water is circulating properly. While a pool clarifier will not resolve the issues of poor circulation, it will help the filter remove them.
  5. Poor filtration: If your pool filter is too small or isn’t working properly, it can cause the water to become cloudy. To fix this issue, you’ll need to clean or replace the filter as needed. In addition, if your pool filter is the typical 5 micron cartridge filter it can allow smaller particulates to pass. Using a pool clarifier will help make smaller particles larger through agglomeration.

In conclusion, there are several potential causes of cloudy pool water, and the solution will depend on the specific issue at hand. By following the troubleshooting tips outlined above, you should be able to get your pool water looking crystal clear once again.

The difference it clear – www.safencleanpools.com

Facebook
Twitter
LinkedIn
Email

Leave a Comment

Your email address will not be published. Required fields are marked *

Shopping Cart

Request our eBook

Covers Filtration, circulation, and how Safe-N-Clean improves filter efficiency. Us trying to do our part to assist pool owners. Plus, 5% off discount!

CLEAN & CLEAR